Many people have had cracks, leaks and seepage at home, and one of the first repair methods most think of is sealant. Sealant lets you build and repair many kinds of work with a smoother finish. One of the most widely used types is silicone sealant
To help you understand and choose silicone sealant for the right job, today we take a close look: what is it used for, how many types are there, and what can each type stick to?

Silicone sealant is an adhesive with silicone polymer as its main ingredient. Once dry and cured it has high elasticity of up to 25% and a glossy finish. It can be used indoors and outdoors, resists UV, and is tough with strong adhesion

Acetic cure silicone has a sour, vinegar-like smell because it contains volatile compounds. As for how long it takes to dry, this type dries fully in just 15 minutes. Once dry it is highly durable, but may corrode materials because it is acidic. It is widely used for bonding chemical-resistant glass, as it is moderately elastic, neither too soft nor too hard, resists UV well and has strong adhesion. It can be used indoors and outdoors, but not on ceramic, metal or stone surfaces, because of the risk of corrosion
Neutral cure silicone dries more slowly and is less strong, but more elastic than acetic cure silicone, with less odour and no corrosion. It has 2 sub-types: Oxime-Based Silicone and Alcoxy-Based Silicone. Its benefit is that it can be used safely on stone, ceramic or metal with no corrosion and no bad smell, but it usually costs more

Now that you know which silicone sealant suits which job, the next thing is using it. Applying silicone neatly and effectively takes 5 key steps
For a neat, smooth bead, first clean the surface so it is clean, dry and free of dust, cement, grease or old sealant. If old silicone remains, remove it with a scraper or cutter, or wipe it off with silicone remover. For a straighter line, apply masking tape along both edges before you start
Next, load the silicone into the caulking gun. Cut the nozzle at a 45-degree angle to match the width of the gap to be sealed, then load the cartridge into the gun and tighten it
When applying, hold the cartridge at a 45-degree angle to the joint, then run the bead along the whole area you want to seal
Once the silicone is applied, for a neat finish you can smooth the surface with a scraper, or use a finger dipped in clean soapy water to tidy up, clean off excess and neaten the edges. Finish before the sealant dries
The last step is waiting for the silicone to dry fully. How long depends on the type of silicone sealant you chose
At a glance, silicone and acrylic sealants are both used to seal gaps or joints in homes and buildings, and look similar. In fact the two differ in some details and properties. For work that is strong and looks the way you want, let's compare silicone and acrylic sealant
Silicone sealant comes in 2 types, neutral and acetic. Acetic silicone dries fast and is elastic, durable and strong with excellent adhesion, and withstands sun, rain and UV. Silicone sealants on the market come in many grades with different properties, such as mould-resistant or fire-retardant sealing, or sealing solar panels, metal sheet roofs, doors and windows. It works on many materials without a primer
Acrylic sealant uses water as its solvent, so it is friendly to the environment and the user. It withstands varied weather, UV, water and chemicals well, bonds to many materials, and works very well for general sealing, fire-retardant sealing and waterproofing of roof decks and walls
Silicone sealant contains chemicals that may be harmful Keep it away from small children and pets. If it touches skin or eyes, rinse off immediately with clean water
Now you know what silicone sealant is, how it differs from acrylic and what it can bond, so your building or repair work comes out smooth and lasts
If you are planning a home extension or repair and looking for a well-designed roof that keeps your home cool, ROOVTECT produces and designs awning roofs and carport roofs inShinkolite acrylic sheets vinyl roofs andand solid polycarbonate roofs with the Knockdown system and distinctive design by professional architects and engineers. For a carport roof or any type of roof extension or installation, contact us for advice and further consultation at 02-096-3464 or LINE Official Account: @roovtect
Front roof extensions, carport roofs and awning installation at quality prices from ROOVTECT, a group of new-generation architects who came together to take the steel industry a step further, blending modern, distinctive design with advanced technology to make roofs and awnings perform better
Just fill in your details and we will contact you with advice on your roof extension and a free online price estimate.